Polycell One Coat Damp Seal Paint 500ml & 1L
Polycell Damp Seal Five Hundred Milliliters
The Polycell Damp Seal is a specially formulated sealant, available in a five hundred milliliter size, designed to tackle penetrating damp on interior walls and ceilings. This effective product is guaranteed to seal damp patches in just one coat, actively preventing them from showing through and spoiling decorations like paint or wallpaper. Damp Seal provides a matt white finish that is suitable for direct application onto plaster, cement, and stone surfaces indoors. Once applied, it is touch dry in approximately four hours (depending on the specific conditions). The treated area can then be over painted with your chosen emulsion or covered with wallpaper as soon as it is fully dry, ensuring a clean and long lasting decorative finish.
Key Features and Specifications
This product is a Damp Sealant (five hundred milliliters). It Seals patches of penetrating damp in just one coat. It Prevents damp from spoiling decoration. It has a Matt white finish. It is Touch dry in four hours (depending on conditions). It is suitable for Plaster, cement, and stone. It is For interior use only.
How to Use:
For Surface Preparation, Ensure the area to be treated is clean and dry. Scrape off any loose or flaking paint. If mold or mildew is present, clean it with an appropriate fungicidal wash first. For Application, Stir the product thoroughly before use. Use a brush or roller to apply a generous coat over the damp patch, ensuring full coverage. For Drying Time, Leave to dry for at least four hours (depending on conditions). For Finishing, Once fully dry, you can over paint with your chosen emulsion or apply wallpaper if desired. For Timing, Apply when the damp patches are dry to the touch and during dry and moderate weather conditions (temperature above ten degrees Celsius).
Advantages and Disadvantages
A major advantage is its single coat effectiveness at sealing penetrating damp, which simplifies the job and prevents damage to new decoration. It provides a matt white finish that is versatile for subsequent paint or wallpaper. A minor drawback is that it is Not recommended for exterior walls or areas that are constantly exposed to moisture. Users must also ensure adequate ventilation when applying and not use it if the temperature is below ten degrees Celsius.
Safety Notes
Ensure adequate ventilation when applying indoors. Do not apply if the temperature is below ten degrees Celsius. Wear protective gloves and avoid contact with eyes and skin. In case of contact, rinse immediately with water. Keep out of reach of children.
FAQs (Frequently Asked Questions)
Q1: Can I paint over the Polycell Damp Seal once it is dry?
A: Yes, once fully dry, you can over paint with your chosen emulsion or apply wallpaper if desired.
Q2: How long does this product need to dry before I can decorate?
A: It is Touch dry in four hours (depending on conditions), but you should allow at least that amount of time before decorating.
